Land Rover suspension problems
Land Rover suspension problems firstly present as a small air leak. The longer it leaks, the more likely you will notice your suspension is ‘sagging’ on the side that drips. You must take range rover suspension fault repair steps; otherwise, you face loose. However, it puts additional pressure on the air compressor, which has to work overtime to compensate for the leak.
The first sign of suspension that you have an issue with is that sense of ‘sag.’ Sometimes, you may observe a sag visually.
Major Components
The suspension fault repair consists of several significant components. Airbags sit in the four corners of your Range Rover and adjust the vehicle body’s height from the wheelbase. Height sensors sit in each corner of the car and detect its distance from the ground. Moreover, the air compressor, storage tank, filter air, and valve block route air to different corners.
Lastly, the electronic control unit controls the Rover system’s settings and allows the driver to adjust the height. Several of these parts are expensive to replace. For instance, if any of these components fail, the entire suspension system can no longer function.
Land Rover suspension repairs and replacement
If you get your Land Rover in early, you may have to replace its air struts. However, if the problem continues for longer and the air compressor fails, you require Range Rover suspension fault repair. Unfortunately, it is an expensive exercise, so the sooner you take action, the better. Range Rover Discovery air suspension failure is a common issue at around 6-7 years, so keep a close eye on your car if it is approaching that age.
Why do Land Rover air suspensions break down?
The problem is not with Range Rover; it’s with air suspensions in general. They are complex systems of many moving and flexible parts. Therefore, Range Rover suspension systems also rely on computers to control them.
How do they work?
- Height sensors at each wheel frequently analyze dips and bumps in the road. Suspension fault repair experts send these readings to a particular suspension computer, called a control module.
- The computer calculates how much air is necessary for each air spring.
- This control module sends instructions to the car compressor, which uses them to produce the air needed to expand the air springs.
- The compressor drives pressurized air through airlines into the air springs, inflating them to smooth out the ride.
- The cycle endures over and over throughout each journey in your Land Range.
